Shree Devi Enviro Plastic Producs
 
 
 
Fine Bubble Tube Diffuser
     Fine Bubble Tube Diffuser (Membrane Sleeve)
     Technical Specification:
We offer a wide range of Fine Bubble Tube Diffuser to our customer. These are available in the range of 60mm, 65mm, 70mm, 75mm, 90mm diameter.
      Fine Bubble Tube Diffuser
     Technical Specification:
Sizes 63MM X 630MM 63MM X 1000MM 90MM X 500MM 90MM X 1000MM
Shape of Diffuser Tube Type Tube Type Tube Type Tube Type
Type of Bubble Fine bubble Fine bubble Fine bubble Fine bubble
MOC of Membrane Epdm / silicon Epdm / silicon Epdm / silicon Epdm / silicon
Detail of Fittings per diffuser Pipe support,
2 Nos. S.S. membrane clips,
1No Dummy Cap and 2 No male adaptors.
1No Air flow Pipe 1No S S nipple.
Pipe support,
2 Nos. S.S. membrane clips,
1No Dummy Cap and 2 No male adaptors.
1No Air flow Pipe 1No
S S nipple.
Pipe support,
2 Nos. S.S. membrane clips,
1No Dummy Cap and 2 No male adaptors.
1No Air flow Pipe 1No S S nipple.
Pipe support,
2 Nos. S.S. membrane clips,
1No Dummy Cap and 2 No male adaptors.
1No Air flow Pipe 1No
S S nipple.
MOC of Membrane Support PVC PIPE PVC PIPE PVC PIPE PVC PIPE
MOC of Membrane Clips SS SS SS SS
MOC of Dummy Cap ABS ABS ABS ABS
MOC of Diffuser Male Adapter ABS ABS ABS ABS
Operating Temperature of Membrane 85 deg. Celsius 85 deg. Celsius 85 deg. Celsius 85 deg. Celsius
Temperature Tolerance Max. 85 degree Celsius Max. 85 degree Celsius Max. 85 degree Celsius

Max. 85 degree Celsius

Nipple attached to diffuser 3/4x3 3/4x3 1x3 1.
Dimensions of Bubble >1mm >1mm >1mm >1mm
Air floating Both side Both side Both side Both side
Membrane surface area 0.13m2 0.21m2 0.14m2 0.29m2
Air put through rate 4 to 6m3/hr. per diffuser 8 to 10 m3/hr. per diffuser 5 to 7 m3/hr. per diffuser 11 to 14 m3/hr.
per diffuser
Tube Diffuser Fine Bubble Tube Diffuser(Membrane Sleeve)
 
 
copyright @ 2012 Shree Devi Enviro Plastic Products all right reserved Powerad by Pixels Infotech